Water balls are large inflatable balls that enables someone inside it to walk or run across the water body surface. It is made of one thick layer, which is also transparent thus enables light to get through it freely. This ball is approximately 2 meters in diameter, with an entrance that gives access into and out of the ball. This ball is specifically made for movement on water bodies. This is why it has been and is still being used by both children and adults at swimming pools, lakes, beaches, and marinas, to mention but a few. Like many other inflatable products, water balls are commonly manufactured from Polyvinyl Chloride (PVC), Thermoplastic Polyurethane (TPU) or a combination of TPU and PVC. However, TPU balls are more expensive than PVC due to its extraordinary features like durability and high tensile strength. These balls come in different sizes and colors depending on your choice. Much as it is safe by its construction standards, there are still some safety concerns of using water balls on large water bodies like sea or lakes. For that reason, it is recommended to use safe confined-shallow water bodies at most 2 feet deep like the swimming pools. It is also recommended to play under supervision by trained personnel or staff. Nonetheless, you can still use large natural water bodies so long as you are under constant supervision. It is generally easy to use a water ball on water. All you need is the water ball, an air pump or blower and a water body. After entering the ball, it will be closed and then inflated using an air pump or blower. This will increase its size, making it easier to control while inside. At this point, all you will be required to do is walk or run in the direction you want while in the ball.

Water Zorbing refers to an inflatable sphere used to float, walk or run on water. The only difference with this one is that you are enclosed inside it. The Water Zorb Ball had been around for quite long when it was commercially created by Charles Blane Jones from Oklahoma, USA, in 1998. Since then, it has rapidly grown to the most enjoyed inflatable games worldwide, due to the fun it brings to the table. What you should know about the Water Zorbing Balls(s); в™Ј They are mostly made from TPU (Thermoplastic Polyurethane) or PVC (Polyvinyl chloride) materials. в™Ј An average ball weighs approximately 15 kilograms. в™Ј It needs to be inflated (filled with air) for it to move easily. в™Ј It can be inflated using an air pump or blower. This can take approximately a minute for the pump while it can take more for other blowers. в™Ј After being inflated, you are ready to go and enjoy the fun on the water. в™Ј You must spend a maximum of 15 minutes inside the ball due to the limited air supply. Thereafter, you can completely deflate and inflate the ball again to continue with your game. в™Ј They can freely be used by both children and adults. This is easier since either of them can easily fit into it, given its 2-metre diameter. в™Ј To ensure safety, every participant must be supervised by trained and competent staff more especially the children. в™Ј They can be used at marinas, swimming pools, theme parks and lakes, among other places. Note: Water Zorbing equipmentsВ made from TPU are more expensive than those from PVC or any other material if there is. One of the reasons is its suitability for use in cold weather or snow. You can order or book now for a water zorb ballВ or more, for you and your friends or family. Come and have a blast while you walk on water.

A Water Walking Ball is basically used for playing on the surface of the water. It involves a person walking, running, floating and sitting inside the ball. It can take place at swimming pools, beaches, lakes, and seas. It is widely played and enjoyed by both children and adults. Even though they are made of reliable materials (PVC or TPU), you should endeavor to watch out for the following identified risks when using water walking balls; o Suffocating. Participants are likely to suffocate if they stay in the ball for more than 15 to 20 minutes. This would be due to loss of or limited oxygen supply. To solve this, you will have to open the water walking ball and inflate it again after every 15 to 20 minutes. o Drowning. This is more likely to take place in large and deep water bodies like lakes. This could be caused by interference or contact with sharp water objects like rocks, sticks or rough walls that can puncture the water walking ball to deflate or bust. Once the water walking ball runs out of the air, the player is left with no support except to swim or call for help. The only solution to this is constant supervision from trained and competent personnel to keep an eagle eye upon the participants. o Collisions. It is very important for the participants to carefully watch their movements to avoid any forms of collision with other participants or water body walls. This is easier given that the balls are transparent. This is to ensure that the water walking balls are safe since a “safe water ball keeps the participant safe”. o Routine maintenance. Given that most risks are a result of the water walking balls being affected, competent personnel should be engaged to carry out routine inspections and maintenance of the balls to ensure there is no degradation of the material. Furthermore, a record of service and maintenance should be kept for future reference. Water Walking Ball for Sale now, order directly online and free shipping.