In the rapid development of the industrial economy since the end of the 1980s, the demand for infrastructure construction plants, equipment, and transportation facilities has increased sharply, and the demand for various metal pipes has been far from being met, and the shape requirements of many metal pipes are constantly complicated. Thus gave birth to the system design and development, it is in this background gradually developed mature.

There is such a rule in the maintenance of cnc pipe end forming machine that the hydraulic system of the equipment must discharge oil regularly and refuel, because the cleanliness of the oil has a very important effect on the operation of the whole system. What specific requirements have been put forward in this regard?

The regular release of water and sediment in the tank is very crucial for removing impurities in the oil, and at the same time, it is necessary to regularly empty the oil in the entire hydraulic system, which is to completely eliminate the system impurities, oxidized hydraulic oil and other harmful substances. Once this is done, clean hydraulic fluid needs to be reintroduced into the system.

Because good hydraulic oil contains a variety of additives, these additives can prevent the oil from deteriorating or blocking the parts of the system, but after long-term use, no one can ensure its efficacy, so it needs to be replaced regularly. In addition to discharging oil and re-refueling, regular replacement of filters is also one of the actions to adhere to the cleaning of the hydraulic cnc pipe end forming machine system, so as to adhere to the system cleaning.

So how can we extend the running life of cnc pipe end forming machine?

1, do not place in direct sunlight, should try to prevent the sun exposure caused by the cnc pipe end forming machine deformation and cracking.

2, should try to adhere to the cnc pipe end forming machine table neat and clean, do not paste glue paper on the table, do not carve on the table, in case of dust, please choose wet towel with soap and water to scrub, do not use alcohol. Water and other corrosive chemicals scrub cnc pipe end forming machine.

3. If the front and back right-angle skateboard and left and right ruler are dry and difficult to move in the use of cnc pipe end forming machine, please clean the dust and debris in the track and use 4B-B pencil lead to paint back and forth on both sides of the sliding track and the lower guide rail of the sliding plate, and the sliding will be smooth as new.

cnc pipe end forming machine https://www.john-sheng.com/CNC-Tube-End-forming